|How to fit the
Single Shoulder Rig
We supply either leather straps or
Chicago Screws to secure the rig in position
Use LockTite to keep
the screw tight
use the leather washers
Trim off the excess strap once you
are comfortable with the fit.
We suggest you leave 3-4 inches
of excess strap for obvious reasons.
There are plenty of holes in the shoulder
and back straps for a comfortable fit
Any questions please call us
|How to fit the
Double Shoulder Rig
|R-12 Shoulder Rig
|R-12 Shoulder Rig
|First, take a moment to look
over your shoulder rig.
The Rig is completely adjustable
We have provided you with either
leather strings or Chicago Screws
with which to make adjustments
to the shoulder straps.
These screws may also include small leather
washers. These washers should be used
with the Chicago screws...they provide
pressure when the screws are tightened.
These Chicago screws should be used
wherever adjustments are needed
in your new shoulder rig.
Here's what the back side
of your rig looks like.
We have provided you with
extra long Straps that can
be cut to the length you wish once
you have fit the rig to your body.
You will notice we have provided a
number of "holes" both in the
shoulder straps and under the
arms where you can attach
the straps to best fit you.
Back Straps are fully
|Looking at the rig here
you can see that the Straps
that cross your back are
attached to the shoulder rig
These straps can also be
adjusted along the shoulder
straps to best fit you.
There are attached along with the
Chicago Screws you received.
You may find addition holes
along the top of the shoulder
rig to make these adjustments.
Be sure the Chicago screws
are tight once you find the right fit.
You may wish to use "Locktite"
but be aware this may "lock" the
screw tight and make it difficult to
unscrew if needed
That should do for the rig...
Any questions just call me
And by the way...
this is "BOB"
He doesn't always dress well
or talk much but he is a
great partner here at
Frontier Leather Works.
Bob tests every Shoulder Rig and
Western Style Rig that we produce...
Once he gives his OK for fit, it's one it's
way to you
|Back to the Judge Page
|Leather Cross Brace
Cross Brace is Not
|The Leather Cross Brace
This piece does not have to be used.. For some the Cross Straps seem to be enough...Your choice!
See the R-16 Rig to the far left and the leather Cross Brace is not being used...It's a matter
of both taste and comfort...BE COMFORTABLE...Any questions call me 866-405-1899
|Tie down straps are also included with your rig...
These are optional...many do not use them...
|Rig Color: Silver Black 2-tone
|COLOR SHOWN HERE: 2-TONE BROWN
Here you can see the
across the top of
the shoulder straps...
The entire R-12 and R-16
Fit the rig
any way you wish
|Strap or Snap tie downs
may be provided...
but not necessary
|Frontier Leather Works
The Home of Truly Custom Leather Works
World's Leader in Judge Holsters & Accessories
Fitting the Frontier
R-90 Shoulder Rig
|You may wish not to use the
Buckle/Strap configuration shown
above...then just remove the buckle
section of the strap and attach the
straps directly to the Shoulder straps
as shown below using the Chicago
Screws. Both Front and Back of the
straps are attached the same way.
|Front View Rear View
|No Cross Brace is used here
|Connecting the straps Without using the
Buckle Strap as shown above.
Secure with supplied Chicago Screws
Holes along the top of the Shoulder
Strap are for adjusting the top strap.
secure the strap to shoulder strap.
Once you fit the rig, cut the straps
to length desired and secure.
|Please see the
example to the
left for more
detailed set up
of your rig.
|Most Frontier Rigs
come with this strap
|Buckle Strap System
|No Buckle System
|Single Adjustable Buckle
|This page will assist you in setting up your shoulder rigs for the
R-16 R-12 R-90